SPC (Stone Plastic Composite) and LVT (Luxury Vinyl Tile) look almost identical in a showroom, so it is easy to assume they perform the same way at home. However, in practice, neither flooring is better overall.
SPC is harder, more dent-resistant, and more forgiving of an uneven floor, while LVT is softer, quieter underfoot, and usually cheaper.
If you need a quick answer to which is better, a reliable rule of thumb is to choose SPC for high-traffic areas, uneven subfloors, and sun-facing rooms. In contrast, LVT works best in bedrooms, quiet-sensitive homes, and spaces with floors that are already flat.
In this guide, we walk through what each floor is made of, the differences that matter, and how to judge durability. We also share room-by-room picks and pricing.
LVT vs SPC Flooring: What is the Key Difference?
The key difference between SPC and LVT lies in the core. Both are a type of vinyl flooring. However, SPC is built on a rigid limestone-and-PVC core, while LVT uses a flexible PVC core.
Above the core, both share a printed design layer and a clear wear layer. That is why it can be so hard to tell LVT vs SPC vinyl flooring apart once installed.
- SPC (stone polymer composite): A dense core made mostly of limestone powder bonded with PVC resin.
- LVT (luxury vinyl tile): A pliable core made mainly of PVC, with some stone powder and stabilisers.
You will notice the difference most underfoot. SPC feels firm and solid with every step, whereas LVT has a slight give that many homeowners find more comfortable.
Comparing the Characteristics of LVT vs SPC Flooring
While SPC comes out ahead on toughness and stability, LVT wins on comfort and quietness. However, the two tie on scratch resistance, maintenance, and waterproofing, since these factors depend on the top layers both floors share.
Here is how LVT vs SPC flooring compares across 10 key characteristics:
| Characteristic | SPC | LVT | Winner |
|---|---|---|---|
| Dent resistance | Resists dents from furniture and dropped items | Can dent under heavy, narrow loads | SPC |
| Scratch resistance | Depends on the wear layer | Depends on the wear layer | Tie |
| Comfort underfoot | Firm and harder on joints | Softer, with slight give | LVT |
| Sound/quietness | Can sound hollow without an underlay | Absorbs footfall noise | LVT |
| Uneven subfloor tolerance | Bridges minor dips and bumps | Shows dips and may need levelling | SPC |
| Heat and UV resistance | Stays stable in strong sun | Can expand or gap in direct sun | SPC |
| Installation methods | Click-lock only | Click-lock or glue-down | LVT |
| Ease of repair | Damaged planks swap out easily | Glue-down planks need adhesive removed | SPC |
| Maintenance | Sweep and damp mop | Sweep and damp mop | Tie |
| Waterproof | Fully waterproof | Fully waterproof | Tie |
Of course, the core only tells part of the story. Before you buy, check these details as well:
- Wear layer: Choose 0.3mm for most homes, or 0.5mm for pets, children, and busy walkways.
- UV-cured coatings: This adds protection against scratches, stains, and fading.
- Attached underlays: A bonded underlay makes SPC quieter and closes much of the comfort gap.
SPC vs LVT Prices in Singapore
SPC typically costs $1 to $3 psf more than comparable LVT. The gap comes down to the core, as SPC needs more raw material and denser manufacturing. Many SPC boards also include a pre-attached underlay.
That said, the psf rate is only one part of your flooring renovation cost. Several other factors can shift the total cost of LVT and SPC flooring.
- Floor preparation: LVT needs a flat base, so uneven floors may need levelling or screeding first.
- Board thickness: Thicker boards and wear layers cost more but hold up better in busy homes.
- Warranty: Longer warranties usually come with higher-grade materials and a slightly higher price.
As a result, levelling an uneven floor for LVT can close the price gap with SPC.
| Cost factor | LVT | SPC |
|---|---|---|
| Material price | Lower | $1 to $3 psf higher |
| Floor preparation | May need levelling | Usually minimal |
| Board thickness | Thinner, flexible | Thicker, rigid |
| Underlay | Often sold separately | Often pre-attached |
| Best value for | Flat floors, tight budgets | Uneven floors, busy homes |
Recommended Rooms to Install SPC or LVT at Home
The right choice between LVT vs SPC flooring depends on how each room gets used. As a general guide, SPC suits busy spaces, such as kitchens, studies, and corridors, while LVT suits bedrooms, where comfort and quiet matter most.
| Room | Better choice | Why |
|---|---|---|
| Master and children’s bedrooms | LVT | Softer, warmer, and quieter underfoot |
| Elderly bedroom | LVT | Offers a softer landing in case of falls |
| Living room | Either | LVT for barefoot comfort, SPC for heavy furniture |
| Kitchen and dining | SPC | Withstands dropped items, spills, and chair scraping |
| Study/home office | SPC | Resists wear from chair castors |
| Hallways and corridors | SPC | Withstands the highest traffic in the home |
| Wet bathroom | Neither | Use tiles instead |
| Older resale flat with uneven screed | SPC | Bridges minor dips with less levelling work |
For most HDB flats and condos, a mix of both works well. Many homeowners lay SPC in the kitchen and corridors, then switch to LVT in the bedrooms for a softer feel.
Frequently Asked Questions About LVT vs SPC Vinyl Flooring
Yes. SPC is vinyl flooring with a rigid stone-composite core, which makes it stiffer and is the main way SPC differs from standard vinyl.
No. Both are fully waterproof, as the difference between them lies in the core. You can mop either floor freely without worrying about swelling.
Whichever has the thicker wear layer. The core matters less than the top layer, which takes the brunt of daily foot traffic.
Yes, they can be installed in dry areas of the bathroom, but they are not recommended for wet shower areas. Standing water can seep through the plank joints over time, so stick with tiles wherever water pools.
Compare SPC and LVT Flooring at Floorrich

Reading about flooring only gets you so far, since the real difference shows up underfoot. Alongside its LVT range, Floorrich is a trusted SPC flooring company, so you can compare both floors side by side.
FirmaSPC offers rigid planks with a 1.5mm attached underlay, giving you stability and quieter steps. Meanwhile, FirmaVinyl is a flexible, phthalate-free LVT with a glue-less click system and a 0.3mm to 0.5mm wear layer.
Before you commit, drop by the Floorrich showroom in Yishun and feel both floors for yourself. The team will be happy to recommend the right option for every room in your home.







