Vinyl Flooring for HDB Flats in Singapore

Vinyl is one of the most popular flooring choices among HDB homeowners in Singapore, valued for its affordability and straightforward installation. HDB’s building works guidelines list the laying of vinyl finishes as permit-free, with no conditions attached, and overlay is often the simplest route of all: new planks are fitted directly over existing tiles, no hacking is required. Floorrich has been fitting HDB flats since 2009, with 51,000+ Singapore homes installed and a 4.8 rating from 493 Google reviews.

$
Pricing confirmed on-site Supply-only HDB vinyl flooring from $1.50 psf 51,000 HDB installations completed since 2009
W
Two separate warranties Limited lifetime product warranty against discolouration and delamination, plus 1 year of workmanship warranty. *T&Cs apply
✓
Material Safety FirmaVinyl is certified eco-friendly and low in formaldehyde by Singapore Green Label (Singapore Environment Council). FirmaSPC is made from eco-safe materials tested, approved and certified by Singapore Green Building Council.
✓
Certifications BCA-approved Contractor bizSAFE level 3
★
4.8 Stars on Google from 493 Reviews
⌂
Real HDB flats with real results See our complete jobs: real HDB flats, photographed as handed over

Our HDB Vinyl Flooring Projects

Every flat is a different job. Installing vinyl over forty-year-old tiles in a 3-room resale flat is nothing like installing it over bare screed in a 4-room BTO, and a gallery is only useful when a visitor can find a job that resembles their own. The projects below are grouped by flat type, with the scope of each job noted alongside. Where a client has given permission, the actual cost of the job appears too, since a real figure from a completed flat tells a homeowner more than any price range can.

With a 4.8-star rating from 493 Google reviews, Floorrich is among the most reviewed HDB vinyl flooring installers in Singapore, and the gallery below reflects the same completed jobs those reviews describe.

2-ROOM HDB FLAT

3-ROOM HDB FLAT

4-ROOM HDB FLAT

Benefits of Vinyl Flooring in an HDB Flat

Vinyl flooring and premium SPC vinyl flooring hold up well against the kind of daily use an HDB flat sees.

01

Water resistance where it counts:

the core resists water, while the seams and subfloor do not. This makes it well suited to living rooms, corridors, and bedrooms where the risk of standing water is low. Spills wipe up easily, provided they are not left to sit.

02

Low-effort, low-maintenance convenience:

a damp mop is enough for day-to-day cleaning. Steam mops are not recommended: they force moisture into the seams and can void the product warranty.

03

Comfort underfoot:

vinyl stays warmer and softer than tile, a difference most noticeable in bedrooms.

04

Fast to fit:

typical HDB vinyl overlays usually finish within a day, compared to a week or more for hacking and retiling.

05

Low cost over its lifespan:

tile costs more to lay and far more to remove. Over roughly twenty years vinyl works out to be more cost-effective than tile, especially once hacking is priced in.

!

One drawback of vinyl flooring we should mention:

it can dent under heavy furniture. A simple home decor hack to prevent this is to use felt floor protectors fitted before the furniture is put back into its spot. This cushions the heavy bulk, preventing dents in your vinyl sheeting. Installing protectors after the furniture goes back into place won’t help as the dent has already formed.

Our Vinyl Collection for HDB Flats

Floorrich offers two ranges of vinyl for HDB work:

FirmaVinyl

FirmaVinyl

flexible luxury vinyl tile with bendable PCV core. Softer underfoot, quieter, and more forgiving on minor subfloor variations.

FirmaSPC

FirmaSPC

a rigid stone polymer composite core made from limestone powder and PVC. Holds its shape better in Singapore’s humidity, and is more resistant to dents and scratches.

SPC click-lock is the type of vinyl flooring most commonly installed in Singapore flats and satisfies the needs of most households. As a vinyl flooring supplier in Singapore stocking both types, Floorrich recommend whichever fits your flat and lifestyle best.

Vinyl colours run from light oak and natural through walnut, grey, whitewash, and marble effect. FirmaVinyl offers seven, including Burmese Teak, Elegance Oak, and Matt Cement. FirmaSPC offers twelve more, from Snow White and Champagne Light through to All Blacks and Platinum Stone. Herringbone comes in Smokey Grey and Natural Oak, and carries additional labour and wastage surcharges.

Plank sizes can change the appearance and ambiance of a room. Standard planks run 180mm by 1220mm, which suits living rooms and bedrooms. Herringbone runs 125mm by 625mm. Looks that mimic stone or cement come as 300mm by 600mm tiles. Wider, longer planks make a compact HDB bedroom read larger, because fewer seams break up the floor.

What HDB Vinyl Flooring Is Made Of

Wear layer

Most buyers compare total thickness when buying vinyl flooring for their HDB. However, they should be looking at the wear layer which is the clear protective film on top of the vinyl plank.

The wear layer’s total thickness tells you about its longevity, stability, sound muffling, scratch- and traffic-resistance, and how much height it adds to the floor. A thicker wear layer, even on a thinner plank, will help the floor last longer before looking worn out.

01

Wear layer:

FirmaVinyl and FirmaSPC vinyl comes with a wear layer between 0.3mm to 0.5mm to absorb your daily traffic with no worries.

02

Total thickness:

FirmaVinyl is 5mm. FirmaSPC is 5mm plus a 1.5mm rubber underlay, so 6.5mm in total. The rubber underlay in FirmaSPC planks double up to muffle sound, so your downstairs neighbours will thank you.

+

Total thickness also decides door clearance, and it counts towards the 50mm HDB cap covered below.

Click-lock vs glue-down system

Both FirmaVinyl and FirmaSPC use a glue-less click-lock system. Planks align, insert, and lock, then float over the subfloor without adhesive. Why we do this:

01

Nothing is glued to your existing floor:

the click design eliminates adhesives and hacking altogether, keeping renovations quick and cost-effective.

02

Repairs stay simple:

a single damaged plank lifts out and swaps easily, no cutting or re-bonding needed.

03

The floor is usable immediately:

there is no curing wait after installation.

Your Flat Type and Site Conditions

Installing vinyl flooring for different HDB flat types

HDB flats run from 2-room at roughly 450 sq ft through to executive and maisonette units above 1,400 sq ft. Floor area determines the amount of materials a project needs, while site conditions affect labour cost.

The bigger split is between BTO and resale flats:

BTO flats:

bare screed, no existing finishes, and a clean subfloor. Simpler, faster, and easier to quote accurately with a firmer timeline. However, scheduling is dependent on when HDB hands over the keys and it’s recommended to book earlier so work can begin straightaway.

Resale flats:

existing tiles, parquet, or prior renovation work, over a subfloor nobody has seen in decades. These need inspection before any quote is final, making both prices and timelines very variable. Work can begin as soon as the keys are handed over to you.

Common project scopes for HDB vinyl flooring installation

Whether BTO or resale, most homeowners floor the living room, bedrooms, hallway, kitchen, and service yard. Vinyl is almost never recommended for bathrooms. Some homeowners also opt for partial scope, like bedrooms-only or kitchen-only jobs.

Vinyl flooring installation also depends on the type of existing flooring being worked on. Original HDB tiles are usually well bonded and take an overlay cleanly, while prior renovation tiles vary. Parquet often hides moisture damage which should be dealt with before the vinyl overlay is applied. Bare screed needs to be levelled before anything goes down to ensure a smooth, bump-free installation.

Existing flooring

Original HDB tiles are usually well bonded and take an overlay cleanly, while prior renovation tiles vary. Parquet often hides moisture damage which should be dealt with before the vinyl overlay is applied.

Bare screed

Bare screed needs to be levelled before anything goes down to ensure a smooth, bump-free installation.

Kitchen and service yard

For the kitchen and service yard, we typically recommend rigid SPC over flexible LVT. Both handle splashes well enough. However, SPC copes better with the repeated wetting those two rooms get.

Stay-in homeowners

Stay-in homeowners can opt for vinyl flooring; shifting of furniture will be provided during the installation.

Minimum site conditions needed for vinyl flooring installation

If you’re considering vinyl flooring for your HDB flat, your unit needs to meet these four site conditions first for a feasibility check:

Floor height gain:

5mm for FirmaVinyl and 6.5mm for FirmaSPC. Doors may need trimming, and thresholds and skirting must meet the new level.

Existing floor condition:

hollow, cracked, or uneven surfaces must be found before quoting, which is why we inspect on site.

Wet-area transitions:

anywhere vinyl meets bathroom tile, the joint needs a proper transition trim to protect against moisture. Sealant alone will not hold.

Subfloor moisture:

excess subfloor moisture can cause your vinyl flooring to warp and deform. Our flooring specialist will test the moisture of the screeded cement floor using a hygrometer. We will ensure the moisture content is within the acceptable level before proceeding with our installation.

Overlay or Hacking: How Vinyl Flooring Can Help Save On Your Renovation Project

Overlay means laying new flooring directly over your existing tiles. Nothing gets removed, and nothing gets hacked, making it easy and cost-effective for any HDB vinyl project. Floorrich’s click-lock vinyl planks float over whatever sits underneath, without any adhesive, which also keeps it clear of several HDB permit conditions covered later.

$

Hacking and removing existing floor tiles runs roughly S$3 to S$7.50 per square foot in the wider Singapore market, or about S$2,000 to S$4,500 across a typical flat. Debris haulage adds a further S$500 to S$1,200. Where overlay is viable, these costs can be avoided altogether.

Suitability of floors for vinyl overlay

Overlay works when the existing floor is sound, determined by four conditions:

Tiles are well adhered with no hollow spots

Lippage between tiles is minimal

The screed underneath is level and uncracked

No moisture is coming up through the slab

!

If any of these are missing, the vinyl overlay fails. Hollow tiles telegraph movement through the new floor. Significant lippage shows as visible ridges. A cracked or uneven screed transfers straight through. Moisture warps planks and lifts the floor at the joins. Laying over a floor with any of these problems hides the issue rather than solving it, so we recommend hacking instead to ensure your flooring is solid from the start.

HDB flooring cap

50mm

HDB caps total floor finishes and screed at 50mm thickness. In an older flat that has already been renovated once, the existing build-up may have consumed most of that allowance before you start, requiring on-site measurements.

Weighed fairly, overlay gives you less dust and debris, a shorter timeline, and far less disruption to neighbours. That’s why overlay has become a popular flooring option in Singapore. However, it does raise the floor further and commits you to whatever sits underneath. It also adds to the build-up future renovations must work within.

✓
Our recommendation:

If your tiles are sound and your 50mm allowance has room, overlay is the better job in most flats. If the floor is hollow, cracked, or damp, hack it. We’ll lay out all our options and recommendations, though the decision is ultimately with you, the homeowner.

Typical Costs to Install Vinyl Flooring by HDB Flat Type in Singapore

Start by checking whether a quote is supply-only or supply-and-install. Mixing up the two is the most common way a quote looks cheaper than it actually is.

All figures below apply the mid-range product grade to common laid areas. Laid area typically runs below a flat’s gross floor area as bathroom and wall footprints are excluded.

Product grade Indicative psf (Supplied and installed)
Entry-level vinyl sheet and glue-down plank S$2.50 to S$4.50 psf
Mid-range click-lock plank and standard LVT S$4.50 to S$7.00 psf
Premium LVT and SPC with a thicker wear layer S$7.00 to S$12.00 psf
HDB Flat Type Square footage Indicative totals (Estimate range)
2-room 400 to 480 sq ft S$1,800 to S$3,400
3-room 645 to 730 sq ft S$2,900 to S$5,100
4-room 915 to 1,000 sq ft S$4,100 to S$7,000
5-room 1,180 to 1,400 sq ft S$5,300 to S$9,800
Executive/Maisonette 1,400 to 1,670 sq ft S$6,300 to S$11,700

Floor area, rooms in scope, material grade, screeding requirements, and finishing scope affect the indicative total.

Screeding or self-levelling

charged where the subfloor needs correcting, typically S$3.50 to S$6.50 psf across the market.

Skirting

typically S$2 to S$6 per linear foot, and a flat commonly needs 60 to 80 linear metres.

Door trimming

physically unavoidable, since vinyl raises the floor. Market rate runs S$30 to S$85 per door leaf.

Threshold strips

S$20 to S$50 per doorway depending on the profile.

Disposal and haulage

typically S$500 to S$1,200 for a flat.

For a fuller breakdown of vinyl flooring costs in Singapore, including how material grade affects flooring costs, our pricing guide goes through it line by line.

Vinyl Installers or DIY Peel and Stick

$

Peel-and-stick vinyl tiles start around S$0.60 per square foot on local marketplaces. Across a 4-room flat that is roughly S$550 to S$1,900 in materials, and this excludes the cost of tools for installation. Peel-and-sticks also have no workmanship or product warranties, giving you little to no recourse if it fails.

When DIY Makes Sense

For some jobs, DIY is a reasonable choice: single rooms, rental units, short-term fixes before a bigger renovation, or tenancies where the floor can’t be permanently altered.

Single rooms
Rental units
Short-term fixes before a bigger renovation
Tenancies where the floor can’t be permanently altered

Common Downsides of Peel-and-Stick

For a full-time residence though, peel-and-stick can present some common downsides. The adhesive softens in heat and humidity, causing edges to lift and seams to become visible over time. Skirting and edges are usually where the differences show up first.

Heat and humidity

The adhesive softens in heat and humidity.

Edges and seams

Edges can lift and seams can become visible over time.

Skirting and edges

Skirting and edges are usually where the differences show up first.

20

Measured across twenty years, a professionally installed floor will cost less per year than a DIY peel-and-stick floor that needs redoing every three.

HDB Rules and Permits

Does vinyl flooring need an HDB permit? No. HDB’s building works guidelines list “laying of vinyl finishes, carpet, linoleum” as requiring no permit, with no conditions attached.

The following rules apply when installing vinyl in your HDB flat:

50mm cap

total thickness of floor finishes and screed must not exceed 50mm. In older flats the existing build-up may already use most of it, so measure before you order.

Overlay using adhesive only

no permit needed, subject to four conditions (i.e. one existing layer of finishes including screed, 13mm cap on finishes plus adhesive, no tampering with the floor trap, and no backflow or lateral seepage).

Three-year wet-area restriction

HDB bathroom and toilet finishes must not be replaced for three years from the block’s completion date. New finishes may be laid over them using adhesives meanwhile.

Household shelters

vinyl and linoleum may be laid with no permit. Adhesive-laid finishes and second layers are banned inside the shelter.

When a permit is required: removing or replacing existing floor finishes, hacking, and raising floor level beyond the cap using concrete. Permits cannot be obtained retrospectively.

How Installation Works

Every quote starts with a site measurement.

Lead time

ready stock is available so there is no lead time needed to secure vinyl planks or tiles.

Installation duration

a typical vinyl flooring overlay for HDB flat completes in about a day. Larger flats and hacking jobs run longer.

Stock holding

we help homeowners hold their purchased vinyl planks or tiles for free until renovation starts

These four clips show an overlay done from start to finish, on real flats rather than in a showroom.

The Overlay Method: vinyl going down directly over existing tiles, with no hacking involved.

The Installation Team: the in-house trained installers completing a job start to finish.

Making a Small Room Look Bigger: how plank choice and layout change the feel of a room.

A One-Day Overlay: a full overlay finished and ready to walk on within a day.

Homeowners need to sequence their renovation plan properly too. Flooring goes in after painting and electrical work, and before carpentry is fixed down. Getting that order wrong usually requires reworking.

Formaldehyde and Phthalates in Vinyl Flooring

If you have children or pets, indoor air quality and chemical safety are likely your top priorities when choosing new flooring.

FirmaSPC

FirmaSPC

  • Certified and approved by the Singapore Green Building Council (SGBC) and tested by SGS.
FirmaVinyl

FirmaVinyl

  • Certified as low in formaldehyde by the Singapore Environment Council
  • Certified eco-friendly with the Singapore Green Label from the Singapore Environment Council.

Both FirmaSPC and FirmaVinyl are tested and confirmed to be low in phthalates. While some suppliers may claim their vinyl flooring contains zero phthalates, we encourage asking for a certified test report to verify any "phthalate-free" claims.

For households seeking the strictest formaldehyde-free standard, FirmaSPC is the recommended choice.

Slip Resistance

Both FirmaVinyl and FirmaSPC undergo rigorous testing to ensure reliable traction and slip resistance for everyday home and commercial use:

FirmaSPC

Rated R10, offering enhanced grip and slip resistance, making it highly recommended as an anti-slip material for high-traffic or moisture-prone areas.

FirmaVinyl

Certified Class X, ensuring reliable, everyday traction under standard foot traffic conditions.

Warranty and Credentials

Product warranty and workmanship warranty cover two different things. Be careful with any vinyl flooring quote that blurs them.

Limited lifetime product warranty

limited lifetime warranty against milling and manufacturing defects in the board.

Workmanship warranty

one year from handover of the installation.

Exclusions:

1

Improper maintenance: damage from soaps, detergents, harsh chemicals, dressings, one-step cleaners, or wax.

2

Negligence, abuse, or intentional damage: including casualty from acts of God such as flood, fire, or earthquake.

3

Subfloor moisture or alkalinity: discolouration or bond release caused by hydrostatic pressure.

4

Unstable or improperly prepared subfloor: including particleboard, chip wood, pressboard, wet or cold floors, and radiant-heated floors.

Three conditions apply before you buy vinyl flooring for your HDB flat:

The warranty is not transferable: it does not pass to a new owner if you sell.

Defects must be reported in writing within three months of the date of the defect.

The remedy is replacement of the defective product.

Floorrich stands by our workmanship and is committed to making your renovation journey as transparent as possible.

Floorrich has been an appointed HDB BTO flooring supplier since 2018. We work across residential and commercial properties with 17 years of expertise behind us. Our showroom opens seven days a week if you want to see and handle the vinyl flooring material before deciding. There is no pushy sales talk, and no obligation to buy on the day.

Contact Us for a Quote
Vinyl Flooring Quotation Calculator

Calculate The Cost of Your New Flooring

google

I surveyed several flooring vendors before choosing Floorrich. Their SPC flooring stood out - solid, easy to maintain, and the colors give a warm, cozy feel. Vic sent extra sample photos to help me visualize the look and went above and beyond when installation didn't go as planned. She listened to my concerns, coordinated with the installer, and made sure the final result matched my vision. The whole process wouldn't have been easy without her patience and understanding. Floorrich has good quality products and people like Vic - highly recommend!

google

Highly recommend! Ke Xin was extremely patient and supportive in helping us choose the right flooring. The light white wood grain design looks beautiful and brightens up our home so nicely. Love the quality and the excellent service!

google

I engaged Vic for my vinyl flooring and had a great experience. She was very helpful, professional, and responded really fast. After the vinyl was installed, I needed someone to trim my door and reinstall it. Vic went the extra mile to help me find a contact and even informed the person about my problem. I’m very satisfied with her service and would definitely recommend her!

google

Our primary contact is Vic, she is friendly and responsive to all our questions from beginning till the end of, much appreciated😊. The work team on site also did a good job, keeping the place tidy and organized, the pool deck was nicely laid and all defects were promptly rectified 👍. Overall, highly recommended.

google

Sales rep, Vic was very responsive and was clear and quick in her responses to my queries. Very happy with the overall service and end product. Highly recommended!

google

We needed to replace our flooring which had worn out after ten years. Reached out to Floorrich and was served by Vic. And the job was done in just 3 weeks! Super efficient and job was very well done. The pictures speak for themselves. Very pleased with Floorrich!

google

I recently completed the renovation of my new home and decided to engage Floorrich directly for my flooring instead of going through my id to save on costs. From the very beginning, Vic was incredibly helpful and responsive. We started discussing the project almost four months before the actual installation, and throughout the entire process, she was patient, professional, and always willing to answer my questions. I must say that Vic and the entire Floorrich team exceeded my expectations. The installation team worked meticulously, taking their time to ensure every flooring plank and skirting piece was perfectly aligned. Their attention to detail and workmanship were truly impressive, and it was obvious that they took pride in delivering quality work rather than rushing to finish the job. What impressed me even more was the excellent after-sales service. A few weeks after I moved in, the silicone in one of my toilets came off. I contacted Vic, and without any hesitation or excuses, she immediately arranged for her team to come down and rectify the issue. The touch-up was done promptly and professionally. It's not often that you come across a company that delivers both quality workmanship and reliable after-sales support. Thank you, Vic, and the Floorrich team, for making this part of my renovation such a smooth and pleasant experience. I would definitely recommend Floorrich to anyone looking for quality flooring and excellent customer service.

google

I am so glad that I found Floorrich to replace the vinyl of my aunt's room. Sheena was very prompt with my WhatsApp queries and provided a quotation very quickly based on the information I shared. At the showroom, she was very sincere and warm despite having to serve 2-3 groups of walk-ins at the same time. Kudos to Mizanur Rahman and Alan Syed for their work. They were very professional and their workmanship were good! Thank you once again to Sheena and her team!

Contact Us

Floorrich Global Pte. Ltd

 

Showroom Address:
5 Yishun Industrial Street 1, #04-11 Northspring Bizhub, Singapore 768161

 

Opening hours:
Monday to Friday: 9.00 am to 5.30 pm
Saturday: 12.00 pm to 5.00 pm
Sunday: 12.00 pm to 5.00 pm
Public holidays: 1.00 pm to 5.00 pm
(Other hours can be arranged with prior appointment)


Email:
enquiry@floorrich.com
Showroom: +65 64622939
WhatsApp: +65 84440099

Frequently Asked Questions About HDB Vinyl Flooring

Does HDB vinyl flooring need a permit?

No. HDB’s building works guidelines list the laying of vinyl finishes, carpet, and linoleum as requiring no permit, with no conditions attached. Replacing existing tiles does require a permit, which is one reason vinyl overlay is the simpler route when flooring a HDB flat.

How long does it take to install vinyl flooring in a whole HDB flat?

A typical HDB vinyl overlay completes in about a day. A DIY peel-and-stick job across the same flat takes a weekend or more, longer again for a first attempt.

Can I lay vinyl flooring over my existing HDB tiles?

Yes, provided the tiles are sound. HDB permits laying finishes over existing finishes using adhesive only, capped at 13mm including adhesive. Only one existing layer may sit beneath, and the floor trap stays untouched.

Is there a minimum job charge?

No, we do not require a minimum area requirement to take on your flooring project.

How much wastage should I allow?

Allow 5% to 10% for standard plank layouts. Herringbone needs more, because the diagonal cuts at walls and doorways generate a higher offcut rate.

How much will my floor level rise?

FirmaVinyl adds 5mm and FirmaSPC adds 6.5mm including its attached backing. Both sit well inside HDB’s 50mm cap on total finishes and screed. In an older flat, the existing build-up must be measured first.

What are the permitted renovation hours in an HDB flat?

General renovation runs 9am to 6pm on weekdays and Saturdays, with none on Sundays or public holidays. Noisy work is restricted further, to 9am to 5pm on weekdays only.

Do you remove my existing skirting?

Yes, our installation team can remove your existing skirting as part of the job. Existing skirtings are typically removed when replacing old flooring, as homeowners generally prefer installing new skirtings that match their updated design.

Can I stay in the flat during installation?

Yes, you can remain in your home during the installation process. Our team assists with moving furniture and works efficiently section-by-section to minimise dust and disruption to your daily routine.

Will long planks fit in my lift?

Most HDB service lifts take standard vinyl flooring planks without difficulty. Older blocks with smaller lifts occasionally need planks carried up. However, we check access at the site measurement, well before delivery day.

Do the planks need to acclimatise before installation?

No. Floorrich’s click-lock vinyl flooring ranges are ready for immediate use after installation, with no curing wait and no acclimatisation period.

What happens if a plank gets damaged later?

Click-lock planks can be lifted and replaced individually, which is one of the practical advantages of the system. We recommend keeping a small quantity of spare stock from your original batch, since dye lots shift between production runs.

How long will the floor actually last?

Luxury vinyl tiles last up to 20 years in a normal household. Premium grades with a thicker wear layer are built for 15 to 20 years or more of residential service. Entry-level products in a busy hallway will show wear sooner.

How do I clean it without voiding the warranty?

Vinyl flooring can be maintained with a damp mop. Make sure the mop is well-wrung to avoid excess moisture, and use a neutral cleaner. Avoid steam mops entirely, since they drive moisture and heat into the seams and can void your warranty.